00:00 IST · Pune
ShardulMW
Get a quote

01 About Shardul Mesh Works

Manufacturing practical mesh & safety solutions for modern spaces.

Est. 2016Warje, PuneManufacturer & installer

We design, fabricate and install mesh, safety and space solutions for homes, housing societies and commercial projects — every one of them made to the measurements of the opening it lives in.

Pleated honeycomb partition dividing a living and dining space
Pleated Honeycomb PartitionMade to measure in our Warje workshop

02 Our story

2016

The year the first bench went up in Warje

Owner's photo
Shantanu KhandareFounder & Managing Director

We started with one fabrication bench and one idea: measure first, then manufacture. Not the other way round.

Shardul Mesh Works was founded by Shantanu Khandare after years of seeing mesh and grill work in Pune done with ready-made kits, cut down on site to roughly fit. The results were familiar: gaps at the edges, nets that sagged after one monsoon and screens that stopped sliding within a year.

So we built a workshop instead of a showroom. Owning fabrication let us control the size, the material and the finish of everything we install. That small unit has since grown into a full production setup making nine product lines, from mosquito mesh to invisible grills, nets, partitions, crystal doors and cloth drying systems.

Today we work with homeowners, housing societies, architects, interior designers and builders across Pune and PCMC, and every job still starts the same way: with a site visit and a tape measure.

Founded
2016
Founder
Shantanu Khandare
Workshop
Warje, Pune
Installations
10,000+

03 What we manufacture

Nine products.
Three families.

Each product solves a specific problem in a specific opening. Grouped together, they cover almost everything a balcony, window, door or open space needs: protection from insects, birds and falls, and smarter use of space.

04 Our manufacturing approach

Understand. Measure.
Manufacture. Install.

Installation-only suppliers fit what they can buy. We fit what we make. Owning fabrication means we control dimensions, materials and finish, and can solve awkward openings that off-the-shelf kits can’t.

  1. 01

    Understand

    A site visit and a conversation: how the space is used, who it protects and what it has to withstand.

  2. 02

    Measure

    Precise dimensions of every opening, with checks on level, square and the surfaces we’ll fix into.

  3. 03

    Manufacture

    Cutting, fabrication and assembly in our Warje workshop to the measured size and chosen finish.

  4. 04

    Install

    Fitting, tensioning and finishing on site, followed by a final inspection with you.

Inside the workshop

From raw material to finished product, under one roof.

Cutting and finishing aluminium profiles in the workshop
01
WorkshopCutting & finishing profiles
Close-up of black honeycomb mesh fabric
02
MaterialsMesh, fabric & profiles we stock
Corner of a white mesh frame with a fitted corner patch
03
FabricationFrames cut to the measured size
Hands pressing mesh into an aluminium frame channel
04
AssemblyMesh fitted into the frame
Technician testing a pleated mesh door on a balcony
05
Quality checkingEvery door opened & closed before sign-off
Finished pleated mosquito mesh door opening onto a garden
06
Finished productsPleated mesh, balcony door

05 Materials & quality

Specified materials.
Not guesswork.

Every product has a defined material specification, from the grade of stainless steel in a grill cable to the UV treatment on a net. Here’s what goes into each one.

  • Aluminium
  • SS 304
  • SS 316
  • HDPE
  • Nylon
  • Fiberglass
  • Polyester
  • Polycarbonate
  • Tempered glass
ProductMesh / materialFrame / fixingKey specification
01Mosquito MeshFiberglass (PVC-coated) or SS 304 wire meshPowder-coated aluminium, black or white16×18 standard; finer mesh for dust or tiny insects
02Pleated Mosquito MeshPolyester, fiberglass, PVC coated, SS coated or European meshAluminium top & bottom track, nylon guide cordApprox. 16 mm pleats; for large doors & balconies
03Pleated Honeycomb PartitionNon-woven aluminium coated inside or polyester honeycomb (cellular) fabricAluminium track, ceiling or wall mountedPrivacy
04Crystal DoorsClear polycarbonate or tempered glass stripsPowder-coated aluminium profileSliding rollers with lock handle
05Invisible Safety GrillsSS 316 nylon-coated cable, 2 / 2.5 / 3 mm (7×7)T6 aluminium track channels with tensioning, SS fasteners and stars2, 4 or 6 inch spacing
06Safety NetsHDPE or nylon knotted net, UV stabilisedSS hooks or clips on a wire rope frame25–50 mm mesh · 2–3 mm twine
07Sports NetsHDPE or nylonGI pipe poles with wire rope support25–50 mm mesh · 2–4 mm twine
08Pigeon NetsHDPE / nylon, UV stabilisedBorder tangoos, wire rope and hooks25–40 mm mesh · 1.5–2 mm twine
09Cloth Drying SystemSS 304 pipesPowder-coated aluminium or MS bracketsWall, foldable or ceiling · 20–40 kg load
  • ✓

    Made to the measured size

    Nothing is forced to fit. Each product is cut and assembled to the dimensions taken on site.

  • ✓

    Checked before dispatch

    Frames, tracks, fabrics and fittings are inspected in the workshop before they leave.

  • ✓

    Inspected after installation

    Tension, alignment and operation are checked on site, with you, before we call it done.

Want to see how we’d approach your space? Let’s talk it through.

WhatsApp